Screw M5 x 30, Dome Head, PH drive
Product information "Screw M5 x 30, Dome Head, PH drive"
M5x20mm screw , DIN 7985 dome head PH drive. For connecting side-parts of your case and rails.
| Drive Style: | PH |
|---|---|
| Finish: | Zinc Plated |
| Head Type: | Dome |
| Length / Height [mm]: | 20 |
| Material: | Steel |
| Standard: | DIN 7985 |
| Thread Size: | M5 |
Manufacturer / Hersteller:
Joseph Dresselhaus GmbH & Co. KG
Zeppelinstraße 13
32051 Herford
Germany
info@dresselhaus.de
Product Safety Information
General Safety Instructions for Screws and Nuts
Intended Use:
• Screws and nuts are designed for the mechanical fastening of components and should only be used in accordance with their technical specifications.
• Use outside the specified applications may lead to mechanical failure and pose safety risks.
Installation:
• Use appropriate tools (e.g., screwdrivers, wrenches) and ensure that screws or nuts are tightened securely but not excessively. Over-tightening can damage the material.
• Wear suitable protective gear, such as work gloves and safety goggles, during installation to prevent injuries.
Compatibility:
• Screws and nuts must match in size, thread, and material. Do not mix components from different DIN standards, as this may compromise safety.
Warning Notices:
• Choking Hazard: Screws and nuts are small parts that can be life-threatening if swallowed. Keep them out of reach of children.
• Risk of Injury: Improper installation or use can result in injuries, such as cuts or pinching.
• Risk of Material Damage: Inappropriate use in high-stress or corrosive environments may lead to premature failure.
Contact Information
For further information visit the manufacturers homepage our shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com
Joseph Dresselhaus GmbH & Co. KG
Zeppelinstraße 13
32051 Herford
Germany
info@dresselhaus.de
Product Safety Information
General Safety Instructions for Screws and Nuts
Intended Use:
• Screws and nuts are designed for the mechanical fastening of components and should only be used in accordance with their technical specifications.
• Use outside the specified applications may lead to mechanical failure and pose safety risks.
Installation:
• Use appropriate tools (e.g., screwdrivers, wrenches) and ensure that screws or nuts are tightened securely but not excessively. Over-tightening can damage the material.
• Wear suitable protective gear, such as work gloves and safety goggles, during installation to prevent injuries.
Compatibility:
• Screws and nuts must match in size, thread, and material. Do not mix components from different DIN standards, as this may compromise safety.
Warning Notices:
• Choking Hazard: Screws and nuts are small parts that can be life-threatening if swallowed. Keep them out of reach of children.
• Risk of Injury: Improper installation or use can result in injuries, such as cuts or pinching.
• Risk of Material Damage: Inappropriate use in high-stress or corrosive environments may lead to premature failure.
Contact Information
For further information visit the manufacturers homepage our shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com
Login