Wirehead Instruments - Freaq FM (DIY Kit)
Product number:
100668-RD
Product information "Wirehead Instruments - Freaq FM (DIY Kit)"
This is the DIY version of this synth. It is available with blue or red LEDs. If you are looking for the assembled version, please search for the other product!
The Freaq FM is an 8-bit digital synthesizer for your desktop featuring dual 2-op FM voice architecture with multiple waveforms, LFO and modulation envelopes with a 16-step generative sequencer.
From soul-soothing sine waves to multiverse-shredding modulated distortion, slapping bass lines to soaring arp leads, the Freaq FM is a powerhouse of sound design packaged with a melodic and intuitive generative sequencer inspired by the likes of Elektron, Intellijel & Music Thing.
With 2 channels of liquid FM sounds, it plays great by itself or synced with your favorite external gear.
Features:
• 2 independent 2-operator FM voices
• Multi-mode FM ratios & operator waveforms
• Attack/Decay modulation envelope per voice
• LFO per voice with multiple waveforms and destinations (envelope attack, decay & depth, FM ratio, amop decay)
• 2/1.5 track polymetric sequencer with 1-16 steps per track
• Parameter-lock recording of synth parameters
• Multiple generative algorithms
• Global tonic & scale (Ionian (Major), Minor (Dorian), Pentatonic, Phrygian, Octaves, Fifths)
• Tap-tempo control
• Sync input & output (Eurorack & Volca/PO compatible)
• Audio output (14-bit DAC)
• 7-12V DC or USB powered
DIY-Kit-Type:
SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
The Freaq FM is an 8-bit digital synthesizer for your desktop featuring dual 2-op FM voice architecture with multiple waveforms, LFO and modulation envelopes with a 16-step generative sequencer.
From soul-soothing sine waves to multiverse-shredding modulated distortion, slapping bass lines to soaring arp leads, the Freaq FM is a powerhouse of sound design packaged with a melodic and intuitive generative sequencer inspired by the likes of Elektron, Intellijel & Music Thing.
With 2 channels of liquid FM sounds, it plays great by itself or synced with your favorite external gear.
Features:
• 2 independent 2-operator FM voices
• Multi-mode FM ratios & operator waveforms
• Attack/Decay modulation envelope per voice
• LFO per voice with multiple waveforms and destinations (envelope attack, decay & depth, FM ratio, amop decay)
• 2/1.5 track polymetric sequencer with 1-16 steps per track
• Parameter-lock recording of synth parameters
• Multiple generative algorithms
• Global tonic & scale (Ionian (Major), Minor (Dorian), Pentatonic, Phrygian, Octaves, Fifths)
• Tap-tempo control
• Sync input & output (Eurorack & Volca/PO compatible)
• Audio output (14-bit DAC)
• 7-12V DC or USB powered
DIY-Kit-Type:
SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
| DIY Level: | Medium |
|---|---|
| Depth [mm]: | 100 |
| Height [mm]: | 40 |
| Material / Color: | Black FR4 |
| Power Input Type (pri.): | 9 Vdc / Barrel (5,5/2,1) |
| Width [mm]: | 111 |
Manufacturer / Hersteller:
Wirehead Instruments
Andrew Row
PO Box 1001
6910 Claremont, WA
Australia
support@wireheadinstruments.com
EU responsible:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19
04229 Leipzig, Germany
support@exploding-shed.com
WEEE-Nr.: DE94097895
Product Safety Information
Desktop / Standalone DIY Kits
Important Notice & Intended Use
Please read this safety guide before installation or use. This kit is intended for adult users experienced in electronics and modular synthesis. Assembly, including soldering, is required. Proper testing and installation are essential to ensure safe and functional operation. The completed product is intended as a desktop / standalone unit and is powered by an external DC power supply between +5V and +18V, depending on the specific unit.
General Warnings
2.1. Electrical Hazards:
• Ensure the power supply matches the module’s specified voltage and current ratings (refer to the product manual). Incorrect voltage can damage the module and pose a safety risk.
• Wrong polarity can damage your synth, make sure the unit is connected with correct polarity.
2.2. Heat Generation:
• The module or power supply may generate heat during operation. Do not cover one of them.
2.3. Sharp Edges:
• The module’s faceplate and components may have sharp edges. Handle with care to avoid cuts or scratches.
2.4. Small Parts:
• Contains small parts that could cause a choking hazard. Keep away from children and pets.
2.5. Compatibility:
• This module is designed specifically for usage with other devices that operate on Eurorack- or line-level. Connecting it to non-compatible systems may result in damage or malfunction.
Assembly Requirements
• Soldering skills are required to complete the unit.
• Ensure a clean, well-lit and ventilated workspace free of flammable materials during assembly.
• Use appropriate tools and safety equipment, such as eye protection.
Testing
• Test the module thoroughly for shorts or incorrect assembly before powering it up. When the unit has malfunctions due to incorrect assembly, the unit or power supply might be damaged.
• Use a multimeter or other appropriate tools to confirm proper functionality.
Installation and Use
• Use only the included or manufacturer-recommended power cable and/or powerr supply.
• Follow the module's user guide for instructions on operation. Do not exceed the input/output limits specified.
Responsibility
Users are solely responsible for proper assembly and testing. Contact manufacturer support for assistance if needed.
Environmental Safety
• Dispose of the module, its components, and packaging in accordance with local electronic waste regulations.
Liability Disclaimer
• The manufacturer or distributor is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.
Contact Information
For further assistance, contact the manufacturer (you'll find the info under each product in our shop) our shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com
Wirehead Instruments
Andrew Row
PO Box 1001
6910 Claremont, WA
Australia
support@wireheadinstruments.com
EU responsible:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19
04229 Leipzig, Germany
support@exploding-shed.com
WEEE-Nr.: DE94097895
Product Safety Information
Desktop / Standalone DIY Kits
Important Notice & Intended Use
Please read this safety guide before installation or use. This kit is intended for adult users experienced in electronics and modular synthesis. Assembly, including soldering, is required. Proper testing and installation are essential to ensure safe and functional operation. The completed product is intended as a desktop / standalone unit and is powered by an external DC power supply between +5V and +18V, depending on the specific unit.
General Warnings
2.1. Electrical Hazards:
• Ensure the power supply matches the module’s specified voltage and current ratings (refer to the product manual). Incorrect voltage can damage the module and pose a safety risk.
• Wrong polarity can damage your synth, make sure the unit is connected with correct polarity.
2.2. Heat Generation:
• The module or power supply may generate heat during operation. Do not cover one of them.
2.3. Sharp Edges:
• The module’s faceplate and components may have sharp edges. Handle with care to avoid cuts or scratches.
2.4. Small Parts:
• Contains small parts that could cause a choking hazard. Keep away from children and pets.
2.5. Compatibility:
• This module is designed specifically for usage with other devices that operate on Eurorack- or line-level. Connecting it to non-compatible systems may result in damage or malfunction.
Assembly Requirements
• Soldering skills are required to complete the unit.
• Ensure a clean, well-lit and ventilated workspace free of flammable materials during assembly.
• Use appropriate tools and safety equipment, such as eye protection.
Testing
• Test the module thoroughly for shorts or incorrect assembly before powering it up. When the unit has malfunctions due to incorrect assembly, the unit or power supply might be damaged.
• Use a multimeter or other appropriate tools to confirm proper functionality.
Installation and Use
• Use only the included or manufacturer-recommended power cable and/or powerr supply.
• Follow the module's user guide for instructions on operation. Do not exceed the input/output limits specified.
Responsibility
Users are solely responsible for proper assembly and testing. Contact manufacturer support for assistance if needed.
Environmental Safety
• Dispose of the module, its components, and packaging in accordance with local electronic waste regulations.
Liability Disclaimer
• The manufacturer or distributor is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.
Contact Information
For further assistance, contact the manufacturer (you'll find the info under each product in our shop) our shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com
Manufacturer "Wirehead Instruments"
“Wireheading is the act of directly triggering the brain's reward center by electrical stimulation of an inserted wire, for the purpose of 'short-circuiting' the brain's normal reward process and artificially inducing pleasure.”
With a lifelong passion for music and technology, I have been designing and building synthesizers, modules and noise machines in my home studio since 2020.
Combining a background in electronics assembly and software development with many years as an acoustic and electronic musician, I have long since bored all my family and friends with endless bleeps&bloops, so I started publishing to share my music/noise with a wider audience. I quickly learned that the world does not need many more 10-minute-long DAWless jams but there are lots of people interested in fun noisy music machines and projects!
In 2023, Meebleeps Machines became “Wirehead Instruments” to reflect the primary purpose of these tools - artificially induced pleasure!
Login