Stannol - Kristall 611
Product number:
100679
Product information "Stannol - Kristall 611"
Kristall 611 is the best solder we could currently find, so we would like to offer it to you for your DIY projects. We tested dozens of solder wires and this stood out, even on difficult surfaces. The diameter of 0,7mm makes it kind of universal. What Stannol say in their own words: The Soldering Wire Kristall 611 electronics soldering wire is based on a halogen-activated "No-Clean" flux. It has been developed for high requirements for conventional soldering and for soldering SMDs in industrial production and for repair and resoldering. The wire flux Kristall 611 is a well activated flux based on synthetic resins. it combines high activity and good flow characteristics in an outstanding way with small amounts of solid and electrically safe residues.
Features:
• Roll of 100g
• 1Kg = 159,66€ (+ tax)
• Very low flux spitting
• Leaves just slightly coloured residues
• Fast soldering
• No-Clean residues
• Chemically modified resin, reducing the health risks of using rosin based fluxes
• Mild odour
Features:
• Roll of 100g
• 1Kg = 159,66€ (+ tax)
• Very low flux spitting
• Leaves just slightly coloured residues
• Fast soldering
• No-Clean residues
• Chemically modified resin, reducing the health risks of using rosin based fluxes
• Mild odour
Manufacturer / Hersteller:
Stannol GmbH & Co. KG
Haberstrasse 24
42551 Velbert
Germany
+49(0)20513120332
sdb@stannol.de
Product Safety Information
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1 Product identifier
Trade name: Loetdraht Kristall 611 Fair Flowtin TSC305; Loetdraht Kristall 611 Fair Flowtin TSC0307
1.2 Relevant identified uses of the substance or mixture and uses advised against
Technical function: soldering
Application of the substance / the mixture: Brazing alloy
1.3 Details of the supplier of the safety data sheet
Manufacturer/Supplier:
Stannol GmbH & Co. KG Haberstrasse 24 D-42551 Velbert
+49 (0) 2051 3120 332 sdb@stannol.de
Further information obtainable from: Product Safety Department
1.4 Emergency telephone number:
8:00 am - 5:00 pm (CET) +49 (0) 2051 3120 332
National Poisons Information Service +44 121 507 4123
Members of the public seeking specific information on poisons should contact: In England and Wales: NHS 111 - dial 111
In Scotland: NHS 24 - dial 111
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
The product is not classified, according to the GB CLP regulation.
2.2 Label elements
Labelling according to Regulation (EC) No 1272/2008: Void
Hazard pictograms: Void
Signal word: Void
Hazard statements: Void
Additional information: EUH210 Safety data sheet available on request.
2.3 Other hazards
Solder wires / solder pastes:
Inhalation of vapors released during the soldering process should be avoided. Flux vapors irritate the nose, throat, and respiratory tract, and can lead to allergic reactions (asthma) after prolonged or repeated contact. Therefore, an active suction is recommended.
After working with the product and before eating, drinking or smoking, wash your hands with soap and water.
Do not heat above 500 °C.
Keep out of the reach of children.
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
SECTION 3: Composition/information on ingredients
3.2 Mixtures
Description: Mixture of substances listed below with nonhazardous additions.
Dangerous components:
CAS: 7440-22-4 silver - substance with a Community workplace exposure limit 0.2 - 5%
EINECS: 231-131-3
CAS: 7440-50-8 - Copper, solid - substance with a Community workplace exposure limit ≤ 1%
EINECS: 231-159-6
SECTION 4: First aid measures
4.1 Description of first aid measures
After inhalation: Supply fresh air; consult doctor in case of complaints.
After skin contact: Generally the product does not irritate the skin.
After eye contact: Rinse opened eye for several minutes under running water.
After swallowing: If symptoms persist consult doctor.
4.2 Most important symptoms and effects, both acute and delayed: No further relevant information available.
4.3 Indication of any immediate medical attention and special treatment needed
No further relevant information available.
https://www.stannol.de/en/products/detail/kristall-611/135/halogenhaltig
Stannol GmbH & Co. KG
Haberstrasse 24
42551 Velbert
Germany
+49(0)20513120332
sdb@stannol.de
Product Safety Information
SECTION 1: Identification of the substance/mixture and of the company/undertaking
1.1 Product identifier
Trade name: Loetdraht Kristall 611 Fair Flowtin TSC305; Loetdraht Kristall 611 Fair Flowtin TSC0307
1.2 Relevant identified uses of the substance or mixture and uses advised against
Technical function: soldering
Application of the substance / the mixture: Brazing alloy
1.3 Details of the supplier of the safety data sheet
Manufacturer/Supplier:
Stannol GmbH & Co. KG Haberstrasse 24 D-42551 Velbert
+49 (0) 2051 3120 332 sdb@stannol.de
Further information obtainable from: Product Safety Department
1.4 Emergency telephone number:
8:00 am - 5:00 pm (CET) +49 (0) 2051 3120 332
National Poisons Information Service +44 121 507 4123
Members of the public seeking specific information on poisons should contact: In England and Wales: NHS 111 - dial 111
In Scotland: NHS 24 - dial 111
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
The product is not classified, according to the GB CLP regulation.
2.2 Label elements
Labelling according to Regulation (EC) No 1272/2008: Void
Hazard pictograms: Void
Signal word: Void
Hazard statements: Void
Additional information: EUH210 Safety data sheet available on request.
2.3 Other hazards
Solder wires / solder pastes:
Inhalation of vapors released during the soldering process should be avoided. Flux vapors irritate the nose, throat, and respiratory tract, and can lead to allergic reactions (asthma) after prolonged or repeated contact. Therefore, an active suction is recommended.
After working with the product and before eating, drinking or smoking, wash your hands with soap and water.
Do not heat above 500 °C.
Keep out of the reach of children.
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
SECTION 3: Composition/information on ingredients
3.2 Mixtures
Description: Mixture of substances listed below with nonhazardous additions.
Dangerous components:
CAS: 7440-22-4 silver - substance with a Community workplace exposure limit 0.2 - 5%
EINECS: 231-131-3
CAS: 7440-50-8 - Copper, solid - substance with a Community workplace exposure limit ≤ 1%
EINECS: 231-159-6
SECTION 4: First aid measures
4.1 Description of first aid measures
After inhalation: Supply fresh air; consult doctor in case of complaints.
After skin contact: Generally the product does not irritate the skin.
After eye contact: Rinse opened eye for several minutes under running water.
After swallowing: If symptoms persist consult doctor.
4.2 Most important symptoms and effects, both acute and delayed: No further relevant information available.
4.3 Indication of any immediate medical attention and special treatment needed
No further relevant information available.
Please find the full safety data sheet here:
Login