Shakmat - Gemini's Path (discontinued)
Product information "Shakmat - Gemini's Path (discontinued)"
* * * Gemini's Path DIY is now discontinued! * * *
This 6 HP skiff friendly amplitude processor is a very handy module to control the dynamics of two signals or mess with the stereo image. Based on a pair of high-end VCAs, an audio to trigger converter and a smart modulation source, the Gemini’s Path allows numerous operations such as decay/gate on amplitude, auto accentuation, side chain compression, auto pan and more!
Features:
• Dual VCA
• Stereo / dual mono dynamic and pannig processor
• Low noise and distorsion That Corp dual VCA core
• Trigger detector section extracting gates & triggers from any audio / CV signal
• 4 dynamic modes : pump, animated pump, expander and holder
• 4 panning modes : LFO pan, random pan, auto-pan and granuliser
• Simple VCA mode giving direct access to level and panning
• Flexible control assignement : shared, dual or independent control with ability to load different modes for each channel
• Audio and external inputs DC coupled
• Unipolar CV inputs
• User replaceable firmware chip
• Digital jumper allowing to set dynamic modes sensible to triggers or gates
• Current state storing
• Skiff Friendly
• Djtechtools rubber injected potentiometers
DIY-Kit-Type:
SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
This 6 HP skiff friendly amplitude processor is a very handy module to control the dynamics of two signals or mess with the stereo image. Based on a pair of high-end VCAs, an audio to trigger converter and a smart modulation source, the Gemini’s Path allows numerous operations such as decay/gate on amplitude, auto accentuation, side chain compression, auto pan and more!
Features:
• Dual VCA
• Stereo / dual mono dynamic and pannig processor
• Low noise and distorsion That Corp dual VCA core
• Trigger detector section extracting gates & triggers from any audio / CV signal
• 4 dynamic modes : pump, animated pump, expander and holder
• 4 panning modes : LFO pan, random pan, auto-pan and granuliser
• Simple VCA mode giving direct access to level and panning
• Flexible control assignement : shared, dual or independent control with ability to load different modes for each channel
• Audio and external inputs DC coupled
• Unipolar CV inputs
• User replaceable firmware chip
• Digital jumper allowing to set dynamic modes sensible to triggers or gates
• Current state storing
• Skiff Friendly
• Djtechtools rubber injected potentiometers
DIY-Kit-Type:
SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
| Current draw +12 V [mA]: | 50 |
|---|---|
| Current draw -12 V [mA]: | 30 |
| DIY Level: | Medium |
| Depth [mm]: | 29 |
| Width [HP]: | 6 |
| Format: | 3U |
| Panel / Color: | Silver Alu |
Manufacturer / Hersteller:
Productions Associées 13851
François Gaspard
2 rue Coenraets
1060 Brussels
Belguim
shakmatmodular@gmail.com
Product Safety Information
Eurorack DIY Kits
Important Notice & Intended Use
Please read this safety guide before installation or use. This kit is intended for adult users experienced in electronics and modular synthesis. Assembly, including soldering, is required. Proper testing and installation are essential to ensure safe and functional operation. The completed module is intended for installation in a Eurorack-compatible synthesizer system powered by ±12V and +5V.
General Warnings
1. Electrical Hazards:
• Ensure the power supply matches the module’s specified voltage and current ratings (refer to the product manual). Incorrect voltage can damage the module and pose a safety risk.
• Never connect or disconnect the module while the Eurorack system is powered on.
• Wrong polarity can damage your module or system. Make sure the module is connected with correct polarity.
2. Heat Generation:
• The module may generate heat during operation. Ensure proper ventilation within your Eurorack case to prevent overheating.
3. Sharp Edges:
• The module’s faceplate and components may have sharp edges. Handle with care to avoid cuts or scratches.
4. Small Parts:
• Contains small parts that could cause a choking hazard. Keep away from children and pets.
5. Compatibility:
• This module is designed specifically for Eurorack-compatible systems. Connecting it to non-compatible systems may result in damage or malfunction.
Assembly Requirements
• Soldering skills are required to complete the module.
• Ensure a clean, well-lit and ventilated workspace free of flammable materials during assembly.
• Use appropriate tools and safety equipment, such as eye protection.
Testing
• Test the module thoroughly for shorts or incorrect assembly before powering it in your Eurorack system. When the unit has malfunctions due to incorrect assembly, the entire Eurorack system might be damaged. It's a good idea to test it in a separate case with only that single module.
• Use a multimeter or other appropriate tools to confirm proper functionality.
Installation and Use
• Mount securely in a Eurorack case using the provided screws.
• Use only the included or manufacturer-recommended power cable.
• Connect only when the power is off.
• Follow the module's user guide for instructions on operation. Do not exceed the input/output limits specified.
Responsibility
Users are solely responsible for proper assembly and testing. Contact manufacturer support for assistance if needed.
Environmental Safety
• Dispose of the module, its components, and packaging in accordance with local electronic waste regulations.
Liability Disclaimer
• The manufacturer or distributor is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.
Contact Information
For further assistance, contact the manufacturer (you'll find the info under each product in our shop) or our shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com
Productions Associées 13851
François Gaspard
2 rue Coenraets
1060 Brussels
Belguim
shakmatmodular@gmail.com
Product Safety Information
Eurorack DIY Kits
Important Notice & Intended Use
Please read this safety guide before installation or use. This kit is intended for adult users experienced in electronics and modular synthesis. Assembly, including soldering, is required. Proper testing and installation are essential to ensure safe and functional operation. The completed module is intended for installation in a Eurorack-compatible synthesizer system powered by ±12V and +5V.
General Warnings
1. Electrical Hazards:
• Ensure the power supply matches the module’s specified voltage and current ratings (refer to the product manual). Incorrect voltage can damage the module and pose a safety risk.
• Never connect or disconnect the module while the Eurorack system is powered on.
• Wrong polarity can damage your module or system. Make sure the module is connected with correct polarity.
2. Heat Generation:
• The module may generate heat during operation. Ensure proper ventilation within your Eurorack case to prevent overheating.
3. Sharp Edges:
• The module’s faceplate and components may have sharp edges. Handle with care to avoid cuts or scratches.
4. Small Parts:
• Contains small parts that could cause a choking hazard. Keep away from children and pets.
5. Compatibility:
• This module is designed specifically for Eurorack-compatible systems. Connecting it to non-compatible systems may result in damage or malfunction.
Assembly Requirements
• Soldering skills are required to complete the module.
• Ensure a clean, well-lit and ventilated workspace free of flammable materials during assembly.
• Use appropriate tools and safety equipment, such as eye protection.
Testing
• Test the module thoroughly for shorts or incorrect assembly before powering it in your Eurorack system. When the unit has malfunctions due to incorrect assembly, the entire Eurorack system might be damaged. It's a good idea to test it in a separate case with only that single module.
• Use a multimeter or other appropriate tools to confirm proper functionality.
Installation and Use
• Mount securely in a Eurorack case using the provided screws.
• Use only the included or manufacturer-recommended power cable.
• Connect only when the power is off.
• Follow the module's user guide for instructions on operation. Do not exceed the input/output limits specified.
Responsibility
Users are solely responsible for proper assembly and testing. Contact manufacturer support for assistance if needed.
Environmental Safety
• Dispose of the module, its components, and packaging in accordance with local electronic waste regulations.
Liability Disclaimer
• The manufacturer or distributor is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.
Contact Information
For further assistance, contact the manufacturer (you'll find the info under each product in our shop) or our shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com
Manufacturer "Shakmat"
Shakmat is a modular synthesizer company based in Brussels, Belgium. We create modules pushing musical expression and creativity forward. Shakmat team gathers engineers, designers and musicians, providing a mixed technical and musical approach to module conception.
Login