Patching Panda - Ephemere
Product information "Patching Panda - Ephemere"
CV Looper Interface. Record and playback LFOs, knob movements, CV, ADSRs, audio etc! This is a high-resolution dual-channel recording interface for your signals. Please check this video to get an idea what Ephemere is.
You can record from 1014sec at 172Hz up to 4 seconds at 44.1kHz of signal on each channel, change the playback speed also it scan through the recorded CV. It has an Oled display to monitor your live and recorded signal to adjust playback length. When nothing is patched to the input you can use the input pot as an offset/cv generator to record pot movements into the module. It´s possible to save, load your signals in the sdCard up to 16GB of space. There are 4 different modes to record to choose from to make more complex signals and 3 different play modes either.
Features:
• 2 Channels signal interface recording
• Record modes (manual, sync, manual multi, sync multi)
• Play modes (forward, backward, pendulum)
• 1014 seconds at 172Hz up to 4 seconds at 44.1kHz to select from the menu.
• Oled display with 2 types of signal monitoring
• Speed control /5 to x5
• Signal recording select from the menu -5V/+5V or 0V/10V
• Save, Load, erase files from 16GB SDcard
• Easy remote updates
• CV control from 0V to 10V
DIY-Kit-Type:
SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
You can record from 1014sec at 172Hz up to 4 seconds at 44.1kHz of signal on each channel, change the playback speed also it scan through the recorded CV. It has an Oled display to monitor your live and recorded signal to adjust playback length. When nothing is patched to the input you can use the input pot as an offset/cv generator to record pot movements into the module. It´s possible to save, load your signals in the sdCard up to 16GB of space. There are 4 different modes to record to choose from to make more complex signals and 3 different play modes either.
Features:
• 2 Channels signal interface recording
• Record modes (manual, sync, manual multi, sync multi)
• Play modes (forward, backward, pendulum)
• 1014 seconds at 172Hz up to 4 seconds at 44.1kHz to select from the menu.
• Oled display with 2 types of signal monitoring
• Speed control /5 to x5
• Signal recording select from the menu -5V/+5V or 0V/10V
• Save, Load, erase files from 16GB SDcard
• Easy remote updates
• CV control from 0V to 10V
DIY-Kit-Type:
SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
| Current draw +12 V [mA]: | 88 |
|---|---|
| Current draw -12 V [mA]: | 20 |
| DIY Level: | Medium |
| Depth [mm]: | 33 |
| Width [HP]: | 14 |
| Format: | 3U |
| Panel / Color: | Black Alu |
Manufacturer / Hersteller:
Patching Panda
C/ Providencia 100 A
08024 Barcelona
Spain
support@patchingpanda.com
Product Safety Information
Eurorack DIY Kits
Important Notice & Intended Use
Please read this safety guide before installation or use. This kit is intended for adult users experienced in electronics and modular synthesis. Assembly, including soldering, is required. Proper testing and installation are essential to ensure safe and functional operation. The completed module is intended for installation in a Eurorack-compatible synthesizer system powered by ±12V and +5V.
General Warnings
1. Electrical Hazards:
• Ensure the power supply matches the module’s specified voltage and current ratings (refer to the product manual). Incorrect voltage can damage the module and pose a safety risk.
• Never connect or disconnect the module while the Eurorack system is powered on.
• Wrong polarity can damage your module or system. Make sure the module is connected with correct polarity.
2. Heat Generation:
• The module may generate heat during operation. Ensure proper ventilation within your Eurorack case to prevent overheating.
3. Sharp Edges:
• The module’s faceplate and components may have sharp edges. Handle with care to avoid cuts or scratches.
4. Small Parts:
• Contains small parts that could cause a choking hazard. Keep away from children and pets.
5. Compatibility:
• This module is designed specifically for Eurorack-compatible systems. Connecting it to non-compatible systems may result in damage or malfunction.
Assembly Requirements
• Soldering skills are required to complete the module.
• Ensure a clean, well-lit and ventilated workspace free of flammable materials during assembly.
• Use appropriate tools and safety equipment, such as eye protection.
Testing
• Test the module thoroughly for shorts or incorrect assembly before powering it in your Eurorack system. When the unit has malfunctions due to incorrect assembly, the entire Eurorack system might be damaged. It's a good idea to test it in a separate case with only that single module.
• Use a multimeter or other appropriate tools to confirm proper functionality.
Installation and Use
• Mount securely in a Eurorack case using the provided screws.
• Use only the included or manufacturer-recommended power cable.
• Connect only when the power is off.
• Follow the module's user guide for instructions on operation. Do not exceed the input/output limits specified.
Responsibility
Users are solely responsible for proper assembly and testing. Contact manufacturer support for assistance if needed.
Environmental Safety
• Dispose of the module, its components, and packaging in accordance with local electronic waste regulations.
Liability Disclaimer
• The manufacturer or distributor is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.
Contact Information
For further assistance, contact the manufacturer (you'll find the info under each product in our shop) or our shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com
Patching Panda
C/ Providencia 100 A
08024 Barcelona
Spain
support@patchingpanda.com
Product Safety Information
Eurorack DIY Kits
Important Notice & Intended Use
Please read this safety guide before installation or use. This kit is intended for adult users experienced in electronics and modular synthesis. Assembly, including soldering, is required. Proper testing and installation are essential to ensure safe and functional operation. The completed module is intended for installation in a Eurorack-compatible synthesizer system powered by ±12V and +5V.
General Warnings
1. Electrical Hazards:
• Ensure the power supply matches the module’s specified voltage and current ratings (refer to the product manual). Incorrect voltage can damage the module and pose a safety risk.
• Never connect or disconnect the module while the Eurorack system is powered on.
• Wrong polarity can damage your module or system. Make sure the module is connected with correct polarity.
2. Heat Generation:
• The module may generate heat during operation. Ensure proper ventilation within your Eurorack case to prevent overheating.
3. Sharp Edges:
• The module’s faceplate and components may have sharp edges. Handle with care to avoid cuts or scratches.
4. Small Parts:
• Contains small parts that could cause a choking hazard. Keep away from children and pets.
5. Compatibility:
• This module is designed specifically for Eurorack-compatible systems. Connecting it to non-compatible systems may result in damage or malfunction.
Assembly Requirements
• Soldering skills are required to complete the module.
• Ensure a clean, well-lit and ventilated workspace free of flammable materials during assembly.
• Use appropriate tools and safety equipment, such as eye protection.
Testing
• Test the module thoroughly for shorts or incorrect assembly before powering it in your Eurorack system. When the unit has malfunctions due to incorrect assembly, the entire Eurorack system might be damaged. It's a good idea to test it in a separate case with only that single module.
• Use a multimeter or other appropriate tools to confirm proper functionality.
Installation and Use
• Mount securely in a Eurorack case using the provided screws.
• Use only the included or manufacturer-recommended power cable.
• Connect only when the power is off.
• Follow the module's user guide for instructions on operation. Do not exceed the input/output limits specified.
Responsibility
Users are solely responsible for proper assembly and testing. Contact manufacturer support for assistance if needed.
Environmental Safety
• Dispose of the module, its components, and packaging in accordance with local electronic waste regulations.
Liability Disclaimer
• The manufacturer or distributor is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.
Contact Information
For further assistance, contact the manufacturer (you'll find the info under each product in our shop) or our shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com
Manufacturer "Patching Panda"
Patching Panda is a DIY & modular brand from spain. Very friendly, good customer support and creative ideas.
Login