Products of Patching Panda
Patching Panda is a DIY & modular brand from spain. Very friendly, good customer support and creative ideas.
%
Patching Panda - BD-Z
sold out at the moment
BD-Z v2 is a versatile kick drum module for Eurorack system focus to design a wide range of bass drum percussive sounds. The implementation of thru-zero FM/PM BD-Z can deliver an an immense variety of textures and harmonics, it has an amount of control of the modulation, input to preserve the primary kick drum sound or not. Check out this video from Superbooth 2021.Also the implementation of amplitude modulation to the sound core it can add more harmonics from the modulation source to be able to shape the sound, transform and morph it into many other drums sounds like bongos, congas, etc. Attention carefully was considered to maintain the signal gain always punchy so when the amplitude decay or the distortion is fully open it won't get out of control.The distortion can be subtle or aggressive, it has a dedicated accent like the vintage style drum machines to add dynamics to the rhythms. Features two amplitude envelopes out to control other utilities with the shape of the signal. BD-Z is a powerful Kick drum module with many modulation possibilities!DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€171.70*
€202.00*
(15% saved)
Patching Panda - Copy Cat
sold out at the moment
2 HP dual buffered Multiple features 2 channels of 3 outputs or 1 channel of 6 outputs if nothing is connected to the second input, it has 2 bi-colour led showing positive and negative voltage.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€44.03*
Patching Panda - Ephemere
available
CV Looper Interface. Record and playback LFOs, knob movements, CV, ADSRs, audio etc! This is a high-resolution dual-channel recording interface for your signals. Please check this video to get an idea what Ephemere is.You can record from 1014sec at 172Hz up to 4 seconds at 44.1kHz of signal on each channel, change the playback speed also it scan through the recorded CV. It has an Oled display to monitor your live and recorded signal to adjust playback length. When nothing is patched to the input you can use the input pot as an offset/cv generator to record pot movements into the module. It´s possible to save, load your signals in the sdCard up to 16GB of space. There are 4 different modes to record to choose from to make more complex signals and 3 different play modes either.Features:• 2 Channels signal interface recording• Record modes (manual, sync, manual multi, sync multi)• Play modes (forward, backward, pendulum)• 1014 seconds at 172Hz up to 4 seconds at 44.1kHz to select from the menu.• Oled display with 2 types of signal monitoring• Speed control /5 to x5• Signal recording select from the menu -5V/+5V or 0V/10V• Save, Load, erase files from 16GB SDcard• Easy remote updates• CV control from 0V to 10VDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€323.68*
Patching Panda - Etna
available
Etna is an advanced triple control analog multimode morphing filter, meticulously designed for precise and dynamic sound shaping. It allows for rapid or smooth transitions between diverse filter settings, known as snapshots.Each snapshot comprehensively defines all of the filter’s parameters, which can be adjusted either swiftly or gradually. These transitions are controlled through an applied voltage or clock and triggers, with the flexibility to use up to eight distinct stages for creating complex filtering effects in a variety of audio applications.In addition to its morphing capabilities, Etna incorporates analog controls that enable real-time, expressive modifications to the parameters of each saved snapshot. This enhancement not only enriches the morphing process but also provides a tactile, live experience that adds significant depth and nuance to the audio output, making it a powerful tool for both studio and live performance settings.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€352.00*
Patching Panda - Flipanda
available
Dual Attenuverter with Sum OutputInverted output, 5v or 10v constant voltage when no input is connected.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€59.50*
Patching Panda - Hatz v2
only 1 left
Hatz v2 is an all-analog module designed to help you sculpt all sorts of hi-hat and percussion sounds. At the core of the module are two noise generators: complex (LFSR) noise and (LOGIC) noise metals. Both channels are equipped with 2-pole filters, and a VCA + envelope combination. A CV-able Decay control for the Open Hi-Hat channel offers a handy solution for more rhythmic animation.New in version 2, Hatz offers a Texture control with dedicated CV input. This control offers a wide range of distinct noise textures, making Hatz great for everything from classic, clicky hats to metallic snares, filtered clangs, and more. V2 also sports revised envelopes and a vastly improved signal to noise ratio, making for a significant upgrade to this already stellar module. Here is a video demo.Features:• Analog hit-hat module combining 2 kinds of noise heart ❤ complex (LFSR) noise and (LOGIC) noise metals• 2 pole filter for each individual channel with CV• Vintage drum machine accent style with choke function• Linear and exponential fall selection in both channels• Decay control with CV in the open hat• Hold intput for manually open the envelope via gates and CV• 2 leds indicatorDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€184.45*
Patching Panda - Moon Phase
available
Moon Phase is a stereo 12dB/octave state variable multimode filter with powerful imaging technique to enhance and alter stereo field. The resonance behaves differently when stereo imager is open beyond any other filter when you play with the stereo imager control. With 8 different combinations and span to separate both filters, you increase the possibilities to treat your sounds and open them in the stereo field. Applying audio rate cv to the stereo imager or span control input and sweeping the cutoff control will create a unique character to the filter. The resonant peaks can be shifted around the stereo field, every cv input can be modulated up to audio rate frequencies creating a wide palette of sonic combinations. Check out the video about the module.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€213.01*
Patching Panda - Operat
available
Operat is an analog complex oscillator with a single core and several modulations inputs that makes a compact size complex oscillator when pairing it with the external gear. The core offers four different waveforms with Thru-zero FM/PM plus symmetry control over the modulation. It has an internal mixer with built-in VCA´s for each waveform and Amplitude/Ring modulation after the mixer circuit. PWM with 3 different configurations plus Hard/Soft sync input. With all these modulation configurations Operat can be transformed into a very wild FM little monster.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€279.65*
Patching Panda - Particles
available
Particles, is 4 channels of trigger modulation, capable of mathematically variating and manipulating your patterns with a combination of fun features to play with. It can evolve your rhythmic idea into more complex and groovy patterns which are difficult to achieve without music knowledge.You can create your algorithms from the rhythmic tools provided to be able to change the patterns instantaneously in many ways without worrying to sacrifice the original idea.You can shift and scramble the outputs, you can repeat the triggers with different time signatures to transform the grooves, mute in different ways, disappear by probability trigger inputs, disappear by probability repetitions, use sequential switching to shift randomly with a different kind of resetting, bypass each channel and set it individually the amount of each feature per channel when feeding external CV.The idea of Particles, was designed to provide features for building complex breaks, grooves, organic-evolving percussion sounds, different options for arpeggios, and even bass line grooves, the limits are decided by you.Features:• 4 trigger inputs/outs.• Repetitions with different distribution time to choose from.• Manually shift the output channels, scramble them randomly or clocked them in foward mode.• Reset the ouputs to 4 different shift modes.• Dissapear repetitions by probability per channel.• Dissapear the input trigger by probability per channel.• Mute each channel with clock divisions from input clock.• Mute manually the outputs• Disable triplets from repetitions to have musical patterns• Random volatges output clocked from clock input.• The slider keeps the adjusted value from each feature.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€243.95*
%
Patching Panda - Petit Mix
sold out at the moment
The Petit Mix is a 3HP Eurorack mixer module with 4 inputs. Each input has its own level control and all inputs are DC coupled to allow for CV mixing as well as audio. There is a bi-colour led on the Frontpanel to indicate signal polarity for active channels. DC coupled, 4 Inputs, Low Noise, Bi-Color LED showing positive (green) and negative (red) voltages.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€47.60*
€59.50*
(20% saved)
Patching Panda - Punch
only 1 left
Punch is the ultimate VCA-DECAY module for Eurorack! Specially designed to generate dynamic percussive sounds but also capable of basslines, leads, envelopes and more. The VCA has a built in voltage controlled Decay envelope that can be turned from smooth to more aggressive exponential responses and can be activated with triggers, gates or cv’s. Punch also features accent inputs on each channel, for more interesting and dynamic sounds and envelopes. Punch v3 features two modes per channel to play, with a dedicated switch control: “vintage style drum machine mode” and “dynamic cv mode”. Punch is capable of creating AM sounds with control voltage on the “amount”. Each envelope can be inverted via dedicated switches on the front panel. If you use an inverted envelope alongside the accent input you can create ducking effects like side-chain compression. Check the official demo here and here a DivKid video about Punch.Features:• Dual VCA with voltage controlled Decay• Adjustable Decay curve• Snappy attack ideal for percussion• Accent inputs• Envelope shape invert switchesDIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€136.85*
Patching Panda - Punch MG
available
Punch MG is a unique module with VCA-DECAY & Mute GROUP designed for Eurorack systems. This module has been specially designed to generate dynamic percussive sounds while also offering the capability to manage multiple signals simultaneously through its innovative mute group feature.Punch MG provides a versatile platform for designing dynamic percussive sounds. With its mute group feature, it allows you to handle numerous signals concurrently.The manual will guide you through the various features and functions of Punch MG, enabling you to explore its full potential.Key Features: Dynamic Sound Generation: Punch MG is engineered to generate dynamic percussive sounds with finesse, offering a range of creative possibilities.Features:• Mute Group Interaction and Signal Patterning: Utilize the mute group feature to enable interactions between signals that share the same group. This feature enables signal muting and amplitude limitation when multiple signals are triggered simultaneously. The amplitude and decay time of each signal are influenced by others in the same group. This characteristic can lead to captivating pattern variations when focusing on specific channels.• Expandable Capability: By linking two modules, you can expand the effect of the mute group to accommodate up to eight signals, fostering intricate interactions and captivating sonic landscapes.• AM Sound Creation: Connect audio rate signals to the level input to explore the creation of AM (Amplitude Modulation) sounds, further extending the sound design possibilities.• Envelope outs: Each envelope's polarity can be inverted using dedicated switches on the front panel, enabling you to achieve effects like side-chain compression and ducking. Also, the mute group circuit's influence extends to the envelope signal output, providing intriguing modulation capabilities that add a unique layer of creative expression to your sonic endeavors.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€236.81*
Patching Panda - Shuby
sold out at the moment
Complex noise generator with 2 different outputs. Out 1 produces clean square waves with sub-harmonics and tone selection, remembering the nostalgic video consoles and taking it to strange metallic vibes. Out 2 is dedicated to the heavy chaotic metallic winds and explosions from other dimensions. Both shares the same signal modulation path, a dedicated output mix is placed to combine both textures to create a unique complex metallic percussions.DIY-Kit-Type:SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
€102.34*