Nyström - Crum Hum (Assembled)
Product number:
100826
Product information "Nyström - Crum Hum (Assembled)"
This is the assembled version of the Crum Hum!
Crum Hum is a 3-voice experimental and expressive soundscaping instrument designed for generative and ever-evolving melodic and harmonic creation.
The Crum Hum features 12 sound engines which range from simple sawtooth and square waves with lowpass filtering, to various wavetable and FM engines and more complex setups like bass, chords, and melody. There are also 12 different built-in scales to play with.
Each of the three voices has a triangular touchpad that lets you control the timbre and volume simultaneously. Each voice also offers a Frequency knob for setting the lowest possible note, as well as a Random knob that sets the probability of notes being played for each clock pulse.
The Tone knob affects the timbre of all three voices simultaneously. What it does exactly depends on the selected sound engine and the tone can also be randomized for subtle to drastic sonic variations at each clock pulse.
Moreover, Crum Hum features built-in delay, reverb, and overdrive effects, as well as an LFO that can modulate the frequency, tone, or volume. There’s an internal clock generator, but it’s also possible to sync the synth to an external clock source. Most parameters can be controlled via MIDI CC (see the user manual for more details).
In addition to a stereo audio output, Crum Hum features a CV output that corresponds to the touchpads, allowing for expressive control of other modular instruments.
Features:
• 3 x melodic voices with expressive touch control
• 12 x different sound engines
• Generative & randomized melodic and chord generation
• 12 x different scales
• Built-in delay, reverb, overdrive and LFO
• 3.5mm CV output
• 3.5mm Clock input
• Send and receive Midi sequencing and Midi CC.
DIY-Kit-Type:
Assembled unit. This is completely ready to use, nothing to solder or to assemble.
Crum Hum is a 3-voice experimental and expressive soundscaping instrument designed for generative and ever-evolving melodic and harmonic creation.
The Crum Hum features 12 sound engines which range from simple sawtooth and square waves with lowpass filtering, to various wavetable and FM engines and more complex setups like bass, chords, and melody. There are also 12 different built-in scales to play with.
Each of the three voices has a triangular touchpad that lets you control the timbre and volume simultaneously. Each voice also offers a Frequency knob for setting the lowest possible note, as well as a Random knob that sets the probability of notes being played for each clock pulse.
The Tone knob affects the timbre of all three voices simultaneously. What it does exactly depends on the selected sound engine and the tone can also be randomized for subtle to drastic sonic variations at each clock pulse.
Moreover, Crum Hum features built-in delay, reverb, and overdrive effects, as well as an LFO that can modulate the frequency, tone, or volume. There’s an internal clock generator, but it’s also possible to sync the synth to an external clock source. Most parameters can be controlled via MIDI CC (see the user manual for more details).
In addition to a stereo audio output, Crum Hum features a CV output that corresponds to the touchpads, allowing for expressive control of other modular instruments.
Features:
• 3 x melodic voices with expressive touch control
• 12 x different sound engines
• Generative & randomized melodic and chord generation
• 12 x different scales
• Built-in delay, reverb, overdrive and LFO
• 3.5mm CV output
• 3.5mm Clock input
• Send and receive Midi sequencing and Midi CC.
DIY-Kit-Type:
Assembled unit. This is completely ready to use, nothing to solder or to assemble.
| DIY Level: | Medium |
|---|---|
| Depth [mm]: | 125 |
| Height [mm]: | 42 |
| Material / Color: | Blue FR4 |
| Power Input Type (pri.): | 5 Vdc / USB micro B |
| Width [mm]: | 145 |
Manufacturer / Hersteller:
Thonk Ltd.
New England House
BN1 4GH Brighton
UK
support@thonk.co.uk
EU responsible:
Albert Nyström
Sorgenfrivägen 35
214 38 Malmö
Sweden
nystrom.instruments@gmail.com
Product Safety Information
Desktop / Standalone DIY Kits
Important Notice & Intended Use
Please read this safety guide before installation or use. This kit is intended for adult users experienced in electronics and modular synthesis. Assembly, including soldering, is required. Proper testing and installation are essential to ensure safe and functional operation. The completed product is intended as a desktop / standalone unit and is powered by an external DC power supply between +5V and +18V, depending on the specific unit.
General Warnings
2.1. Electrical Hazards:
• Ensure the power supply matches the module’s specified voltage and current ratings (refer to the product manual). Incorrect voltage can damage the module and pose a safety risk.
• Wrong polarity can damage your synth, make sure the unit is connected with correct polarity.
2.2. Heat Generation:
• The module or power supply may generate heat during operation. Do not cover one of them.
2.3. Sharp Edges:
• The module’s faceplate and components may have sharp edges. Handle with care to avoid cuts or scratches.
2.4. Small Parts:
• Contains small parts that could cause a choking hazard. Keep away from children and pets.
2.5. Compatibility:
• This module is designed specifically for usage with other devices that operate on Eurorack- or line-level. Connecting it to non-compatible systems may result in damage or malfunction.
Assembly Requirements
• Soldering skills are required to complete the unit.
• Ensure a clean, well-lit and ventilated workspace free of flammable materials during assembly.
• Use appropriate tools and safety equipment, such as eye protection.
Testing
• Test the module thoroughly for shorts or incorrect assembly before powering it up. When the unit has malfunctions due to incorrect assembly, the unit or power supply might be damaged.
• Use a multimeter or other appropriate tools to confirm proper functionality.
Installation and Use
• Use only the included or manufacturer-recommended power cable and/or powerr supply.
• Follow the module's user guide for instructions on operation. Do not exceed the input/output limits specified.
Responsibility
Users are solely responsible for proper assembly and testing. Contact manufacturer support for assistance if needed.
Environmental Safety
• Dispose of the module, its components, and packaging in accordance with local electronic waste regulations.
Liability Disclaimer
• The manufacturer or distributor is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.
Contact Information
For further assistance, contact the manufacturer (you'll find the info under each product in our shop) our shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com
Thonk Ltd.
New England House
BN1 4GH Brighton
UK
support@thonk.co.uk
EU responsible:
Albert Nyström
Sorgenfrivägen 35
214 38 Malmö
Sweden
nystrom.instruments@gmail.com
Product Safety Information
Desktop / Standalone DIY Kits
Important Notice & Intended Use
Please read this safety guide before installation or use. This kit is intended for adult users experienced in electronics and modular synthesis. Assembly, including soldering, is required. Proper testing and installation are essential to ensure safe and functional operation. The completed product is intended as a desktop / standalone unit and is powered by an external DC power supply between +5V and +18V, depending on the specific unit.
General Warnings
2.1. Electrical Hazards:
• Ensure the power supply matches the module’s specified voltage and current ratings (refer to the product manual). Incorrect voltage can damage the module and pose a safety risk.
• Wrong polarity can damage your synth, make sure the unit is connected with correct polarity.
2.2. Heat Generation:
• The module or power supply may generate heat during operation. Do not cover one of them.
2.3. Sharp Edges:
• The module’s faceplate and components may have sharp edges. Handle with care to avoid cuts or scratches.
2.4. Small Parts:
• Contains small parts that could cause a choking hazard. Keep away from children and pets.
2.5. Compatibility:
• This module is designed specifically for usage with other devices that operate on Eurorack- or line-level. Connecting it to non-compatible systems may result in damage or malfunction.
Assembly Requirements
• Soldering skills are required to complete the unit.
• Ensure a clean, well-lit and ventilated workspace free of flammable materials during assembly.
• Use appropriate tools and safety equipment, such as eye protection.
Testing
• Test the module thoroughly for shorts or incorrect assembly before powering it up. When the unit has malfunctions due to incorrect assembly, the unit or power supply might be damaged.
• Use a multimeter or other appropriate tools to confirm proper functionality.
Installation and Use
• Use only the included or manufacturer-recommended power cable and/or powerr supply.
• Follow the module's user guide for instructions on operation. Do not exceed the input/output limits specified.
Responsibility
Users are solely responsible for proper assembly and testing. Contact manufacturer support for assistance if needed.
Environmental Safety
• Dispose of the module, its components, and packaging in accordance with local electronic waste regulations.
Liability Disclaimer
• The manufacturer or distributor is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.
Contact Information
For further assistance, contact the manufacturer (you'll find the info under each product in our shop) our shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com
Login