Nyström - Crum Drum
Product number:
100600
Product information "Nyström - Crum Drum"
Crum Drum is a 4-voice drum machine with built in randomization and probability based sequencing designed by NYSTRÖM
Rhythms can be created and manipulated using the internal random sequencer or externally via MIDI USB. Press the beat button to generate new rhythms, adjust the probability to create continuous variations, and increase the randomness to modulate the sound of your beats! Generated sequences can also be sent out via MIDI USB and Crum Drum can also sync via analog clock in and out.
The four voices of Crum Drum are Kick, Snare, HiHat and Bass (FM). There are 8 parameters knobs to sculpt the character of each voice allowing for wide variety of tones. It’s easy to create varied and organic sequences by adding modulation via the Probability and Randomness controls. Probability sets the chance that the selected voice will play per step of the sequence, while randomness increases the parameter modulation for each voice. The higher the randomness, the more each instrument parameter is modulated per step. Some of the instrument parameter controls have different behaviours depending on which voice is selected, so make sure to check the user manual for full details.
Crum Drum features four global effects which are: Overdrive, Reverb, Delay and Swing. The delay-time is tempo synced and the subdivided differently dependent on the BPM.
Power is provided via micro usb cable (not included)
Features:
• 4 instruments: Kick, Snare, HiHat, Bass
• 8 sound parameters per instrument
• Overdrive, Reverb, Delay & Swing
• Send & Recieve Analog & Midi USB clock
• Send & Receive Midi USB sequencing
• Randomised and probability based sequencing
DIY-Kit-Type:
THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
Rhythms can be created and manipulated using the internal random sequencer or externally via MIDI USB. Press the beat button to generate new rhythms, adjust the probability to create continuous variations, and increase the randomness to modulate the sound of your beats! Generated sequences can also be sent out via MIDI USB and Crum Drum can also sync via analog clock in and out.
The four voices of Crum Drum are Kick, Snare, HiHat and Bass (FM). There are 8 parameters knobs to sculpt the character of each voice allowing for wide variety of tones. It’s easy to create varied and organic sequences by adding modulation via the Probability and Randomness controls. Probability sets the chance that the selected voice will play per step of the sequence, while randomness increases the parameter modulation for each voice. The higher the randomness, the more each instrument parameter is modulated per step. Some of the instrument parameter controls have different behaviours depending on which voice is selected, so make sure to check the user manual for full details.
Crum Drum features four global effects which are: Overdrive, Reverb, Delay and Swing. The delay-time is tempo synced and the subdivided differently dependent on the BPM.
Power is provided via micro usb cable (not included)
Features:
• 4 instruments: Kick, Snare, HiHat, Bass
• 8 sound parameters per instrument
• Overdrive, Reverb, Delay & Swing
• Send & Recieve Analog & Midi USB clock
• Send & Receive Midi USB sequencing
• Randomised and probability based sequencing
DIY-Kit-Type:
THT-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. Only trough-hole parts to solder. Make sure to check the build guide before you buy. For build guide, more info, videos etc. please check the buttons below.
| DIY Level: | Medium |
|---|---|
| Depth [mm]: | 125 |
| Height [mm]: | 42 |
| Material / Color: | Blue FR4 |
| Power Input Type (pri.): | 5 Vdc / USB micro B |
| Width [mm]: | 145 |
Manufacturer / Hersteller:
Thonk Ltd.
New England House
BN1 4GH Brighton
UK
support@thonk.co.uk
EU responsible:
Albert Nyström
Sorgenfrivägen 35
214 38 Malmö
Sweden
nystrom.instruments@gmail.com
Product Safety Information
Desktop / Standalone DIY Kits
Important Notice & Intended Use
Please read this safety guide before installation or use. This kit is intended for adult users experienced in electronics and modular synthesis. Assembly, including soldering, is required. Proper testing and installation are essential to ensure safe and functional operation. The completed product is intended as a desktop / standalone unit and is powered by an external DC power supply between +5V and +18V, depending on the specific unit.
General Warnings
2.1. Electrical Hazards:
• Ensure the power supply matches the module’s specified voltage and current ratings (refer to the product manual). Incorrect voltage can damage the module and pose a safety risk.
• Wrong polarity can damage your synth, make sure the unit is connected with correct polarity.
2.2. Heat Generation:
• The module or power supply may generate heat during operation. Do not cover one of them.
2.3. Sharp Edges:
• The module’s faceplate and components may have sharp edges. Handle with care to avoid cuts or scratches.
2.4. Small Parts:
• Contains small parts that could cause a choking hazard. Keep away from children and pets.
2.5. Compatibility:
• This module is designed specifically for usage with other devices that operate on Eurorack- or line-level. Connecting it to non-compatible systems may result in damage or malfunction.
Assembly Requirements
• Soldering skills are required to complete the unit.
• Ensure a clean, well-lit and ventilated workspace free of flammable materials during assembly.
• Use appropriate tools and safety equipment, such as eye protection.
Testing
• Test the module thoroughly for shorts or incorrect assembly before powering it up. When the unit has malfunctions due to incorrect assembly, the unit or power supply might be damaged.
• Use a multimeter or other appropriate tools to confirm proper functionality.
Installation and Use
• Use only the included or manufacturer-recommended power cable and/or powerr supply.
• Follow the module's user guide for instructions on operation. Do not exceed the input/output limits specified.
Responsibility
Users are solely responsible for proper assembly and testing. Contact manufacturer support for assistance if needed.
Environmental Safety
• Dispose of the module, its components, and packaging in accordance with local electronic waste regulations.
Liability Disclaimer
• The manufacturer or distributor is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.
Contact Information
For further assistance, contact the manufacturer (you'll find the info under each product in our shop) our shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com
Thonk Ltd.
New England House
BN1 4GH Brighton
UK
support@thonk.co.uk
EU responsible:
Albert Nyström
Sorgenfrivägen 35
214 38 Malmö
Sweden
nystrom.instruments@gmail.com
Product Safety Information
Desktop / Standalone DIY Kits
Important Notice & Intended Use
Please read this safety guide before installation or use. This kit is intended for adult users experienced in electronics and modular synthesis. Assembly, including soldering, is required. Proper testing and installation are essential to ensure safe and functional operation. The completed product is intended as a desktop / standalone unit and is powered by an external DC power supply between +5V and +18V, depending on the specific unit.
General Warnings
2.1. Electrical Hazards:
• Ensure the power supply matches the module’s specified voltage and current ratings (refer to the product manual). Incorrect voltage can damage the module and pose a safety risk.
• Wrong polarity can damage your synth, make sure the unit is connected with correct polarity.
2.2. Heat Generation:
• The module or power supply may generate heat during operation. Do not cover one of them.
2.3. Sharp Edges:
• The module’s faceplate and components may have sharp edges. Handle with care to avoid cuts or scratches.
2.4. Small Parts:
• Contains small parts that could cause a choking hazard. Keep away from children and pets.
2.5. Compatibility:
• This module is designed specifically for usage with other devices that operate on Eurorack- or line-level. Connecting it to non-compatible systems may result in damage or malfunction.
Assembly Requirements
• Soldering skills are required to complete the unit.
• Ensure a clean, well-lit and ventilated workspace free of flammable materials during assembly.
• Use appropriate tools and safety equipment, such as eye protection.
Testing
• Test the module thoroughly for shorts or incorrect assembly before powering it up. When the unit has malfunctions due to incorrect assembly, the unit or power supply might be damaged.
• Use a multimeter or other appropriate tools to confirm proper functionality.
Installation and Use
• Use only the included or manufacturer-recommended power cable and/or powerr supply.
• Follow the module's user guide for instructions on operation. Do not exceed the input/output limits specified.
Responsibility
Users are solely responsible for proper assembly and testing. Contact manufacturer support for assistance if needed.
Environmental Safety
• Dispose of the module, its components, and packaging in accordance with local electronic waste regulations.
Liability Disclaimer
• The manufacturer or distributor is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.
Contact Information
For further assistance, contact the manufacturer (you'll find the info under each product in our shop) our shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com
Login