Hex Haus - HEX lag
Product information "Hex Haus - HEX lag"
Hex lag is a digital sound processing instrument with signal modulating potentiometers and an interactive tactile surface for direct sound control. It digitally simulates analogue bucket brigade delay chips (typical of chorus, flanger and karplus-strong), but also enables pitch-shifting, downsampling, etc.
Features:
• Touch pads
• Gain
• Rate
• Spread
• Feed
• Push button
• Header pins
• 3,5 mm input
• 3,5 mm output
• USB C power port
DIY-Kit-Type:
SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
Features:
• Touch pads
• Gain
• Rate
• Spread
• Feed
• Push button
• Header pins
• 3,5 mm input
• 3,5 mm output
• USB C power port
DIY-Kit-Type:
SMD-Kit-2. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. It includes SMD and through-hole parts! For build guide, more info, videos etc. please check the buttons below.
| DIY Level: | Easy |
|---|---|
| Depth [mm]: | 35 |
| Height [mm]: | 70 |
| Material / Color: | Black FR4 |
| Power Input Type (pri.): | 5 Vdc / USB Type-C |
| Width [mm]: | 150 |
Manufacturer / Hersteller:
Zavod Hex Haus
Gestrinova 8
1000 Ljubljana
Slovenia
info@hex.haus
Product Safety Information
Desktop / Standalone DIY Kits
Important Notice & Intended Use
Please read this safety guide before installation or use. This kit is intended for adult users experienced in electronics and modular synthesis. Assembly, including soldering, is required. Proper testing and installation are essential to ensure safe and functional operation. The completed product is intended as a desktop / standalone unit and is powered by an external DC power supply between +5V and +18V, depending on the specific unit.
General Warnings
2.1. Electrical Hazards:
• Ensure the power supply matches the module’s specified voltage and current ratings (refer to the product manual). Incorrect voltage can damage the module and pose a safety risk.
• Wrong polarity can damage your synth, make sure the unit is connected with correct polarity.
2.2. Heat Generation:
• The module or power supply may generate heat during operation. Do not cover one of them.
2.3. Sharp Edges:
• The module’s faceplate and components may have sharp edges. Handle with care to avoid cuts or scratches.
2.4. Small Parts:
• Contains small parts that could cause a choking hazard. Keep away from children and pets.
2.5. Compatibility:
• This module is designed specifically for usage with other devices that operate on Eurorack- or line-level. Connecting it to non-compatible systems may result in damage or malfunction.
Assembly Requirements
• Soldering skills are required to complete the unit.
• Ensure a clean, well-lit and ventilated workspace free of flammable materials during assembly.
• Use appropriate tools and safety equipment, such as eye protection.
Testing
• Test the module thoroughly for shorts or incorrect assembly before powering it up. When the unit has malfunctions due to incorrect assembly, the unit or power supply might be damaged.
• Use a multimeter or other appropriate tools to confirm proper functionality.
Installation and Use
• Use only the included or manufacturer-recommended power cable and/or powerr supply.
• Follow the module's user guide for instructions on operation. Do not exceed the input/output limits specified.
Responsibility
Users are solely responsible for proper assembly and testing. Contact manufacturer support for assistance if needed.
Environmental Safety
• Dispose of the module, its components, and packaging in accordance with local electronic waste regulations.
Liability Disclaimer
• The manufacturer or distributor is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.
Contact Information
For further assistance, contact the manufacturer (you'll find the info under each product in our shop) our shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com
Zavod Hex Haus
Gestrinova 8
1000 Ljubljana
Slovenia
info@hex.haus
Product Safety Information
Desktop / Standalone DIY Kits
Important Notice & Intended Use
Please read this safety guide before installation or use. This kit is intended for adult users experienced in electronics and modular synthesis. Assembly, including soldering, is required. Proper testing and installation are essential to ensure safe and functional operation. The completed product is intended as a desktop / standalone unit and is powered by an external DC power supply between +5V and +18V, depending on the specific unit.
General Warnings
2.1. Electrical Hazards:
• Ensure the power supply matches the module’s specified voltage and current ratings (refer to the product manual). Incorrect voltage can damage the module and pose a safety risk.
• Wrong polarity can damage your synth, make sure the unit is connected with correct polarity.
2.2. Heat Generation:
• The module or power supply may generate heat during operation. Do not cover one of them.
2.3. Sharp Edges:
• The module’s faceplate and components may have sharp edges. Handle with care to avoid cuts or scratches.
2.4. Small Parts:
• Contains small parts that could cause a choking hazard. Keep away from children and pets.
2.5. Compatibility:
• This module is designed specifically for usage with other devices that operate on Eurorack- or line-level. Connecting it to non-compatible systems may result in damage or malfunction.
Assembly Requirements
• Soldering skills are required to complete the unit.
• Ensure a clean, well-lit and ventilated workspace free of flammable materials during assembly.
• Use appropriate tools and safety equipment, such as eye protection.
Testing
• Test the module thoroughly for shorts or incorrect assembly before powering it up. When the unit has malfunctions due to incorrect assembly, the unit or power supply might be damaged.
• Use a multimeter or other appropriate tools to confirm proper functionality.
Installation and Use
• Use only the included or manufacturer-recommended power cable and/or powerr supply.
• Follow the module's user guide for instructions on operation. Do not exceed the input/output limits specified.
Responsibility
Users are solely responsible for proper assembly and testing. Contact manufacturer support for assistance if needed.
Environmental Safety
• Dispose of the module, its components, and packaging in accordance with local electronic waste regulations.
Liability Disclaimer
• The manufacturer or distributor is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.
Contact Information
For further assistance, contact the manufacturer (you'll find the info under each product in our shop) our shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com
Manufacturer "Hex Haus"
A project by two post-alternative media artists. HEX HAUS – institute for development of new technologies is a joint project by media artists and fed up `post-alternative’ millenials Anže Sekelj and Staš Vrenko.
Login