DIY Meetup 2024 - Erica Various Kits
Product number:
100047
Product information "DIY Meetup 2024 - Erica Various Kits"
With this ticket you'll reserve your place in the Erica workshop and can chose spontaneously between of the following DIY kits:
EDU DIY VCO - 60€
Analog sawtooth-core oscillator with a reasonably accurate volt/octave tracking
https://www.ericasynths.lv/shop/diy-kits-1/edu-diy-vco/
EDU DIY VCA - 55€
It has DC-coupled inputs so you can use the VCA both for audio and CV signals
https://www.ericasynths.lv/shop/diy-kits-1/edu-diy-vca/
EDU DIY Noise/S&H - 60€
Perfect for self-sequencing, or for adding a dash of randomness in to your patch. Noise is Queen.
https://www.ericasynths.lv/shop/diy-kits-1/edu-diy-noisesh/
EDU DIY Mixer - 45€
A normal but also not a normal mixer. Case in point: this super simple three-channel mixer with built-in diode distortion will make your patches sound delightfully rough.
https://www.ericasynths.lv/shop/diy-kits-1/edu-diy-mixer/
EDU DUAL EG - 50€
What is a world without Envelope Generators? This optimised ADSR has either an ASR or AD output, with the Release and Decay are controlled by the same knob.
https://www.ericasynths.lv/shop/diy-kits-1/edu-diy-eg/
This ticket reserves your workshop place. The modules itself costs the avove named prices and have to be paid during the event.
Start of the event is 11 am on Oct 26 in Leipzig Plagwitz. We'll email you the address after your registration. We'll have all necessary tools and parts to finish the kits. The ticket fee covers our orga-costs, no refund if you cancel after 2 weeks before the event. The kits itself have to be paid cash on Oct 26. No physical tickets will be shipped. Please select "Local Pickup" during checkout to avoid shipping costs.
EDU DIY VCO - 60€
Analog sawtooth-core oscillator with a reasonably accurate volt/octave tracking
https://www.ericasynths.lv/shop/diy-kits-1/edu-diy-vco/
EDU DIY VCA - 55€
It has DC-coupled inputs so you can use the VCA both for audio and CV signals
https://www.ericasynths.lv/shop/diy-kits-1/edu-diy-vca/
EDU DIY Noise/S&H - 60€
Perfect for self-sequencing, or for adding a dash of randomness in to your patch. Noise is Queen.
https://www.ericasynths.lv/shop/diy-kits-1/edu-diy-noisesh/
EDU DIY Mixer - 45€
A normal but also not a normal mixer. Case in point: this super simple three-channel mixer with built-in diode distortion will make your patches sound delightfully rough.
https://www.ericasynths.lv/shop/diy-kits-1/edu-diy-mixer/
EDU DUAL EG - 50€
What is a world without Envelope Generators? This optimised ADSR has either an ASR or AD output, with the Release and Decay are controlled by the same knob.
https://www.ericasynths.lv/shop/diy-kits-1/edu-diy-eg/
This ticket reserves your workshop place. The modules itself costs the avove named prices and have to be paid during the event.
Start of the event is 11 am on Oct 26 in Leipzig Plagwitz. We'll email you the address after your registration. We'll have all necessary tools and parts to finish the kits. The ticket fee covers our orga-costs, no refund if you cancel after 2 weeks before the event. The kits itself have to be paid cash on Oct 26. No physical tickets will be shipped. Please select "Local Pickup" during checkout to avoid shipping costs.
Manufacturer / Hersteller:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19
04229 Leipzig
Germany
support@exploding-shed.com
WEEE-Nr.: DE94097895
Product Safety Information
Eurorack DIY Kits
Important Notice & Intended Use
Please read this safety guide before installation or use. This kit is intended for adult users experienced in electronics and modular synthesis. Assembly, including soldering, is required. Proper testing and installation are essential to ensure safe and functional operation. The completed module is intended for installation in a Eurorack-compatible synthesizer system powered by ±12V and +5V.
General Warnings
1. Electrical Hazards:
• Ensure the power supply matches the module’s specified voltage and current ratings (refer to the product manual). Incorrect voltage can damage the module and pose a safety risk.
• Never connect or disconnect the module while the Eurorack system is powered on.
2. Heat Generation:
• The module may generate heat during operation. Ensure proper ventilation within your Eurorack case to prevent overheating.
3. Sharp Edges:
• The module’s faceplate and components may have sharp edges. Handle with care to avoid cuts or scratches.
4. Small Parts:
• Contains small parts that could pose a choking hazard. Keep away from children and pets.
5. Compatibility:
• This module is designed specifically for Eurorack-compatible systems. Connecting it to non-compatible systems may result in damage or malfunction.
Assembly Requirements
• Soldering skills are required to complete the module.
• Ensure a clean, well-lit and ventilated workspace free of flammable materials during assembly.
• Use appropriate tools and safety equipment, such as eye protection.
Testing
• Test the module thoroughly for shorts or incorrect assembly before powering it in your Eurorack system. When the unit has malfunctions due to incorrect assembly, the entire Eurorack system might be damaged. It's a good idea to test it in a separate case with only that single module.
• Use a multimeter or other appropriate tools to confirm proper functionality.
Installation and Use
• Mount securely in a Eurorack case using the provided screws.
• Use only the included or manufacturer-recommended power cable.
• Connect only when the power is off.
• Follow the module's user guide for instructions on operation. Donot exceed the input/output limits specified.
Responsibility
Users are solely responsible for proper assembly and testing. Contact manufacturer support for assistance if needed.
Environmental Safety
• Dispose of the module, its components, and packaging in accordance with localelectronic waste regulations.
Liability Disclaimer
• The manufacturer or distributor is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.
Contact Information
For further assistance, contact the manufacturer (you'll find the info under each product in our shop) our shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19
04229 Leipzig
Germany
support@exploding-shed.com
WEEE-Nr.: DE94097895
Product Safety Information
Eurorack DIY Kits
Important Notice & Intended Use
Please read this safety guide before installation or use. This kit is intended for adult users experienced in electronics and modular synthesis. Assembly, including soldering, is required. Proper testing and installation are essential to ensure safe and functional operation. The completed module is intended for installation in a Eurorack-compatible synthesizer system powered by ±12V and +5V.
General Warnings
1. Electrical Hazards:
• Ensure the power supply matches the module’s specified voltage and current ratings (refer to the product manual). Incorrect voltage can damage the module and pose a safety risk.
• Never connect or disconnect the module while the Eurorack system is powered on.
2. Heat Generation:
• The module may generate heat during operation. Ensure proper ventilation within your Eurorack case to prevent overheating.
3. Sharp Edges:
• The module’s faceplate and components may have sharp edges. Handle with care to avoid cuts or scratches.
4. Small Parts:
• Contains small parts that could pose a choking hazard. Keep away from children and pets.
5. Compatibility:
• This module is designed specifically for Eurorack-compatible systems. Connecting it to non-compatible systems may result in damage or malfunction.
Assembly Requirements
• Soldering skills are required to complete the module.
• Ensure a clean, well-lit and ventilated workspace free of flammable materials during assembly.
• Use appropriate tools and safety equipment, such as eye protection.
Testing
• Test the module thoroughly for shorts or incorrect assembly before powering it in your Eurorack system. When the unit has malfunctions due to incorrect assembly, the entire Eurorack system might be damaged. It's a good idea to test it in a separate case with only that single module.
• Use a multimeter or other appropriate tools to confirm proper functionality.
Installation and Use
• Mount securely in a Eurorack case using the provided screws.
• Use only the included or manufacturer-recommended power cable.
• Connect only when the power is off.
• Follow the module's user guide for instructions on operation. Donot exceed the input/output limits specified.
Responsibility
Users are solely responsible for proper assembly and testing. Contact manufacturer support for assistance if needed.
Environmental Safety
• Dispose of the module, its components, and packaging in accordance with localelectronic waste regulations.
Liability Disclaimer
• The manufacturer or distributor is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.
Contact Information
For further assistance, contact the manufacturer (you'll find the info under each product in our shop) our shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com
Manufacturer "Exploding Shed"
We are enthusiastic nerds from Leipzig who are dedicated to synthesizers and DIY of any kind. We're passionate about developing, producing and distributing products that we ourselves are convinced of. We love to work out clever solutions for challenging problems. In our team, everyone has their own strengths that they contribute to the collective result. And we do this with genuine commitment.
Login