Black Noise Modular - GOMA
Product number:
100588
Product information "Black Noise Modular - GOMA"
GOMA stands for Generator, Offset, Mixer, Attenuverter.
The idea behind GOMA was to make an improved version of the classic 3 Attenuator / Attenuverter modules.
We wanted to design a high-end, yet small module so it could fit in any case. We want it to be ergonomic and easy to use despite its size. But we also wanted to pack as much features as possible in it to make it a "swiss knife module".
The result is GOMA a 4 HP modules made of high-end components for max precision (low tolerance resistors, low noise/distortion opamps). Each channel can be set as Attenuator or Attenuverter using the dedicate switch. Each channel can be normalized to +5 or +10V using the dedicate switch. We have taken great care in the design and choice of switches to avoid switching by accident when tweaking the knobs. We have added LEDs to make it easy to use in dark environments. We have added feedback LEDs on each channel so you can spot the state of the output at anytime.
And we added, which is maybe the best feature, daisy chain! You can easily daisy chain multiple GOMA modules to create virtually infinite mixer/offset generators.
GOMA is 100% analog so the switches keep there states even when your rack is off.
GOMA is so flexible that we use it in all our patchs, we are very pleased about it and we hope you'll like it as much as we do.
DIY-Kit-Type:
SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
The idea behind GOMA was to make an improved version of the classic 3 Attenuator / Attenuverter modules.
We wanted to design a high-end, yet small module so it could fit in any case. We want it to be ergonomic and easy to use despite its size. But we also wanted to pack as much features as possible in it to make it a "swiss knife module".
The result is GOMA a 4 HP modules made of high-end components for max precision (low tolerance resistors, low noise/distortion opamps). Each channel can be set as Attenuator or Attenuverter using the dedicate switch. Each channel can be normalized to +5 or +10V using the dedicate switch. We have taken great care in the design and choice of switches to avoid switching by accident when tweaking the knobs. We have added LEDs to make it easy to use in dark environments. We have added feedback LEDs on each channel so you can spot the state of the output at anytime.
And we added, which is maybe the best feature, daisy chain! You can easily daisy chain multiple GOMA modules to create virtually infinite mixer/offset generators.
GOMA is 100% analog so the switches keep there states even when your rack is off.
GOMA is so flexible that we use it in all our patchs, we are very pleased about it and we hope you'll like it as much as we do.
DIY-Kit-Type:
SMD-Kit-1. This is a Do-It-Yourself kit, not an assembled module. The kit includes all parts to build the module. All SMD parts are pre-soldered, only trough-hole parts to solder. For build guide, more info, videos etc. please check the buttons below.
| Current draw +12 V [mA]: | 33 |
|---|---|
| Current draw -12 V [mA]: | 33 |
| DIY Level: | Medium/Advanced |
| Depth [mm]: | 20 |
| Width [HP]: | 4 |
| Format: | 3 U |
| Panel / Color: | Black FR4 |
Manufacturer / Hersteller:
Black Noise Modular
14 Rue Montmeroux
21120 Gemeaux
France
contact@blacknoisemodular.com
Product Safety Information
Eurorack DIY Kits
Important Notice & Intended Use
Please read this safety guide before installation or use. This kit is intended for adult users experienced in electronics and modular synthesis. Assembly, including soldering, is required. Proper testing and installation are essential to ensure safe and functional operation. The completed module is intended for installation in a Eurorack-compatible synthesizer system powered by ±12V and +5V.
General Warnings
1. Electrical Hazards:
• Ensure the power supply matches the module’s specified voltage and current ratings (refer to the product manual). Incorrect voltage can damage the module and pose a safety risk.
• Never connect or disconnect the module while the Eurorack system is powered on.
• Wrong polarity can damage your module or system. Make sure the module is connected with correct polarity.
2. Heat Generation:
• The module may generate heat during operation. Ensure proper ventilation within your Eurorack case to prevent overheating.
3. Sharp Edges:
• The module’s faceplate and components may have sharp edges. Handle with care to avoid cuts or scratches.
4. Small Parts:
• Contains small parts that could cause a choking hazard. Keep away from children and pets.
5. Compatibility:
• This module is designed specifically for Eurorack-compatible systems. Connecting it to non-compatible systems may result in damage or malfunction.
Assembly Requirements
• Soldering skills are required to complete the module.
• Ensure a clean, well-lit and ventilated workspace free of flammable materials during assembly.
• Use appropriate tools and safety equipment, such as eye protection.
Testing
• Test the module thoroughly for shorts or incorrect assembly before powering it in your Eurorack system. When the unit has malfunctions due to incorrect assembly, the entire Eurorack system might be damaged. It's a good idea to test it in a separate case with only that single module.
• Use a multimeter or other appropriate tools to confirm proper functionality.
Installation and Use
• Mount securely in a Eurorack case using the provided screws.
• Use only the included or manufacturer-recommended power cable.
• Connect only when the power is off.
• Follow the module's user guide for instructions on operation. Do not exceed the input/output limits specified.
Responsibility
Users are solely responsible for proper assembly and testing. Contact manufacturer support for assistance if needed.
Environmental Safety
• Dispose of the module, its components, and packaging in accordance with local electronic waste regulations.
Liability Disclaimer
• The manufacturer or distributor is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.
Contact Information
For further assistance, contact the manufacturer (you'll find the info under each product in our shop) or our shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com
Black Noise Modular
14 Rue Montmeroux
21120 Gemeaux
France
contact@blacknoisemodular.com
Product Safety Information
Eurorack DIY Kits
Important Notice & Intended Use
Please read this safety guide before installation or use. This kit is intended for adult users experienced in electronics and modular synthesis. Assembly, including soldering, is required. Proper testing and installation are essential to ensure safe and functional operation. The completed module is intended for installation in a Eurorack-compatible synthesizer system powered by ±12V and +5V.
General Warnings
1. Electrical Hazards:
• Ensure the power supply matches the module’s specified voltage and current ratings (refer to the product manual). Incorrect voltage can damage the module and pose a safety risk.
• Never connect or disconnect the module while the Eurorack system is powered on.
• Wrong polarity can damage your module or system. Make sure the module is connected with correct polarity.
2. Heat Generation:
• The module may generate heat during operation. Ensure proper ventilation within your Eurorack case to prevent overheating.
3. Sharp Edges:
• The module’s faceplate and components may have sharp edges. Handle with care to avoid cuts or scratches.
4. Small Parts:
• Contains small parts that could cause a choking hazard. Keep away from children and pets.
5. Compatibility:
• This module is designed specifically for Eurorack-compatible systems. Connecting it to non-compatible systems may result in damage or malfunction.
Assembly Requirements
• Soldering skills are required to complete the module.
• Ensure a clean, well-lit and ventilated workspace free of flammable materials during assembly.
• Use appropriate tools and safety equipment, such as eye protection.
Testing
• Test the module thoroughly for shorts or incorrect assembly before powering it in your Eurorack system. When the unit has malfunctions due to incorrect assembly, the entire Eurorack system might be damaged. It's a good idea to test it in a separate case with only that single module.
• Use a multimeter or other appropriate tools to confirm proper functionality.
Installation and Use
• Mount securely in a Eurorack case using the provided screws.
• Use only the included or manufacturer-recommended power cable.
• Connect only when the power is off.
• Follow the module's user guide for instructions on operation. Do not exceed the input/output limits specified.
Responsibility
Users are solely responsible for proper assembly and testing. Contact manufacturer support for assistance if needed.
Environmental Safety
• Dispose of the module, its components, and packaging in accordance with local electronic waste regulations.
Liability Disclaimer
• The manufacturer or distributor is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.
Contact Information
For further assistance, contact the manufacturer (you'll find the info under each product in our shop) or our shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com
Manufacturer "Black Noise Modular"
Black Noise Modular specializes in the production of handcrafted boutique Eurorack modules in Dijon, France. They design distinctive, innovative and high-quality tools for sound explorers who want to delve into unexplored sonic worlds. Their commitment to quality, sound and functionality is rock solid, allowing you to unleash your creativity with ease.
Login