Befaco / DivKid - Stereo Strip (Assembled)
Product information "Befaco / DivKid - Stereo Strip (Assembled)"
This is the assembled version of Stereo Strip. It is a 6 HP Eurorack module that builds upon the idea of a studio or mixer channel strip for a modular environment. If you’re new to the term ‘channel strip’ think of a single channel strip from a mixing desk. You’ll find amplification, EQ, panning and level control options. Stereo Strip builds on those ideas adding voltage control for increased functionality within the Eurorack modular synthesiser
environment.
This module is designed in collaboration with Ben Wilson aka Divkid.
Features:
• 3 band EQ
• Panning (manual and voltage controlled)
• VCA level control (manual or voltage controlled)
• 3 way performance muting (on-off-momentary)
• Soft clipping limiter (distortion!)
• Line level input and/or output adjustment
environment.
This module is designed in collaboration with Ben Wilson aka Divkid.
Features:
• 3 band EQ
• Panning (manual and voltage controlled)
• VCA level control (manual or voltage controlled)
• 3 way performance muting (on-off-momentary)
• Soft clipping limiter (distortion!)
• Line level input and/or output adjustment
| Current draw +12 V [mA]: | 63 |
|---|---|
| Current draw -12 V [mA]: | 63 |
| DIY Level: | NOT DIY |
| Depth [mm]: | 33 |
| Width [HP]: | 6 |
| Format: | 3U |
| Panel / Color: | Black Alu |
Manufacturer / Hersteller:
BEFACO Modular, S.L.
Pere IV 29-35
7° 6a
08018 Barcelona
Spain
sales@befaco.org
Product Safety Information
Eurorack DIY Kits
Important Notice & Intended Use
Please read this safety guide before installation or use. This kit is intended for adult users experienced in electronics and modular synthesis. Assembly, including soldering, is required. Proper testing and installation are essential to ensure safe and functional operation. The completed module is intended for installation in a Eurorack-compatible synthesizer system powered by ±12V and +5V.
General Warnings
1. Electrical Hazards:
• Ensure the power supply matches the module’s specified voltage and current ratings (refer to the product manual). Incorrect voltage can damage the module and pose a safety risk.
• Never connect or disconnect the module while the Eurorack system is powered on.
• Wrong polarity can damage your module or system. Make sure the module is connected with correct polarity.
2. Heat Generation:
• The module may generate heat during operation. Ensure proper ventilation within your Eurorack case to prevent overheating.
3. Sharp Edges:
• The module’s faceplate and components may have sharp edges. Handle with care to avoid cuts or scratches.
4. Small Parts:
• Contains small parts that could cause a choking hazard. Keep away from children and pets.
5. Compatibility:
• This module is designed specifically for Eurorack-compatible systems. Connecting it to non-compatible systems may result in damage or malfunction.
Assembly Requirements
• Soldering skills are required to complete the module.
• Ensure a clean, well-lit and ventilated workspace free of flammable materials during assembly.
• Use appropriate tools and safety equipment, such as eye protection.
Testing
• Test the module thoroughly for shorts or incorrect assembly before powering it in your Eurorack system. When the unit has malfunctions due to incorrect assembly, the entire Eurorack system might be damaged. It's a good idea to test it in a separate case with only that single module.
• Use a multimeter or other appropriate tools to confirm proper functionality.
Installation and Use
• Mount securely in a Eurorack case using the provided screws.
• Use only the included or manufacturer-recommended power cable.
• Connect only when the power is off.
• Follow the module's user guide for instructions on operation. Do not exceed the input/output limits specified.
Responsibility
Users are solely responsible for proper assembly and testing. Contact manufacturer support for assistance if needed.
Environmental Safety
• Dispose of the module, its components, and packaging in accordance with local electronic waste regulations.
Liability Disclaimer
• The manufacturer or distributor is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.
Contact Information
For further assistance, contact the manufacturer (you'll find the info under each product in our shop) or our shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com
BEFACO Modular, S.L.
Pere IV 29-35
7° 6a
08018 Barcelona
Spain
sales@befaco.org
Product Safety Information
Eurorack DIY Kits
Important Notice & Intended Use
Please read this safety guide before installation or use. This kit is intended for adult users experienced in electronics and modular synthesis. Assembly, including soldering, is required. Proper testing and installation are essential to ensure safe and functional operation. The completed module is intended for installation in a Eurorack-compatible synthesizer system powered by ±12V and +5V.
General Warnings
1. Electrical Hazards:
• Ensure the power supply matches the module’s specified voltage and current ratings (refer to the product manual). Incorrect voltage can damage the module and pose a safety risk.
• Never connect or disconnect the module while the Eurorack system is powered on.
• Wrong polarity can damage your module or system. Make sure the module is connected with correct polarity.
2. Heat Generation:
• The module may generate heat during operation. Ensure proper ventilation within your Eurorack case to prevent overheating.
3. Sharp Edges:
• The module’s faceplate and components may have sharp edges. Handle with care to avoid cuts or scratches.
4. Small Parts:
• Contains small parts that could cause a choking hazard. Keep away from children and pets.
5. Compatibility:
• This module is designed specifically for Eurorack-compatible systems. Connecting it to non-compatible systems may result in damage or malfunction.
Assembly Requirements
• Soldering skills are required to complete the module.
• Ensure a clean, well-lit and ventilated workspace free of flammable materials during assembly.
• Use appropriate tools and safety equipment, such as eye protection.
Testing
• Test the module thoroughly for shorts or incorrect assembly before powering it in your Eurorack system. When the unit has malfunctions due to incorrect assembly, the entire Eurorack system might be damaged. It's a good idea to test it in a separate case with only that single module.
• Use a multimeter or other appropriate tools to confirm proper functionality.
Installation and Use
• Mount securely in a Eurorack case using the provided screws.
• Use only the included or manufacturer-recommended power cable.
• Connect only when the power is off.
• Follow the module's user guide for instructions on operation. Do not exceed the input/output limits specified.
Responsibility
Users are solely responsible for proper assembly and testing. Contact manufacturer support for assistance if needed.
Environmental Safety
• Dispose of the module, its components, and packaging in accordance with local electronic waste regulations.
Liability Disclaimer
• The manufacturer or distributor is not responsible for any injury, damage, or malfunction resulting from improper installation, use, or modification of this product.
Contact Information
For further assistance, contact the manufacturer (you'll find the info under each product in our shop) or our shop support team at:
Tech Creation Lab Leipzig UG (haftungsbeschränkt)
Nonnenstrasse 19, 04229 Leipzig, Germany
support@exploding-shed.com
Manufacturer "Befaco / Divkid"
Creating a YouTube channel in 2014 allowed me to both document my own journey through music and technology but also to work with companies and individuals to teach synthesis and sound design techniques through the creation of in depth product demos, demonstrating equipment in a raw technical form looking at features while exploring musical examples.
The technical and educational sides of the video demonstrations alongside my background and continuing practice of music creation has led to beta testing and product development as well as consultation with a wide range of both hardware and software music companies – often on the cutting edge of instrument design and music technology.
Striving to fulfil needs and gaps in the Eurorack marketplace, a series of collaborative DivKid modules launched in 2019 with more collaboration and modules to come in the future. Working together in a collaborative environment is always inspiring and motivational … you can get in touch here to discuss your projects and ideas.
Login